Corrugated Breathing Tubing Roll

This corrugated breathing tubing is supplied as a continuous roll in 30 m and 60 m lengths, to be cut to whatever length the customer needs. It is intended for distributors, OEM customers and facilities that assemble their own breathing circuits, rather than for direct clinical use as supplied.

Buying tubing by the roll changes the cost structure. There is no per-unit cutting, packing or labelling to pay for, and no waste from pre-cut lengths that turn out to be the wrong size — the customer cuts exactly what is needed. For a distributor or a manufacturer building circuits in volume, the cost per finished circuit falls accordingly.

Two roll lengths are available. The 30 m roll suits smaller assembly volumes or trials; the 60 m roll suits continuous production and reduces the number of roll changes.

If you need finished, ready-to-use circuits rather than bulk tubing, see our corrugated single limb circuit and corrugated anesthesia circuit kit.

Key Features:

• Continuous corrugated tubing in 30 m and 60 m rolls

• Cut to any length the customer requires

• No per-unit cutting or packing cost

• No waste from pre-cut lengths that are the wrong size

• Ribbed wall that resists kinking

• Supplied uncut, for assembly by the customer

Applications:

• Distributors packing their own breathing circuits

• OEM assembly of anesthesia and ventilator circuits

• Facilities that cut and fit their own tubing

• Trials and sample runs before volume production

Important Notes:

• Supplied uncut, as bulk tubing. It is not a finished breathing circuit and is not intended for direct clinical use as supplied.

• Connectors are not included. The customer is responsible for cutting, fitting connectors and validating the finished assembly.

• Cut ends must be deburred and fitted with the correct connector before use.

• Store the roll in a clean, dry place and protect it from sunlight and physical damage.

• Inspect the tubing before use; do not use sections that are crushed, cracked or contaminated.

• Where the finished circuit is a medical device, the customer is responsible for its regulatory status and labelling.

This product is manufactured under an ISO 13485:2016 certified quality management system (Certificate No. CN25-10207H).